[Hans Peter] wanted to move away from using full Arduino boards in his projects. One of the components he rarely used after the development stage is the USB hardware. Once the firmware is flashed to ...

AVRDUDE can be made to run using a modified conf file to accommodate some of the 8051-derived uCs, but the USBasp is a bigger challenge. Mainly because virtually all uCs use an active LOW RESET ...

This shield / carrier board, once assembled, turns your Arduino Nano, Arduino Pro Mini, or Arduino Pro Micro into an AVR ISP programmer. The ISCP socket is wired to work directly with the ArduinoISP ...

Turning an Arduino of virtually any sort into a simple AVR 6-pin ISP programmer is old hat. But when Atmel came out with a series of really tiny AVR chips, the ATtiny10 and friends with only six pins ...

The reprogramming of the Lily main board was easily allowed by the USB to UART board that does not require the need for soldering. The Lily Pad main board is using the FT232RL integrated circuit from ...

The circuit was based on the use of Arduino AVR to build a high voltage programmer which can be used to fix pesky fuses. The circuit was based on the use of Arduino AVR to build a high voltage ...

Arduino hobbyists, developers and programmers that would like to be able to remove the need to use cables to access their Arduino projects, might be interested in a new wireless programmer ...

Arduino is probably the first thing that comes to mind for most hobbyists and students when they think about embedded systems. It has certainly gained its name among the electronics community, and in ...